Data Initialization Through Service Operation - Canon FAX-L350 Service Manual

FAX-L350 Chapter 1: General Description

5.4.4 Data initialization through service operation

All the data can be initialized with the service data #8 clear operation.
REFERENCE
NOTE
For details on the initialization procedure and the data that is erased, see Chapter 3: 5.2
Service Data Settings on Page 3-28.
"All clear" when nothing works.
On a rare occasion, the display may go blank and all the buttons may stop working. Severe
electrical noise and static can cause problems as well. In such a case, use the "All clear"
feature.
After installing the unit for the first time and connecting the power cord, execute "All
clear".
Also, after an "All clear", we recommend that you set the country type to suit the
communication standard used in your country. Below is the procedure for performing All
clear and type setting operation.
ALL CLEAR
Data
#
Registration
#8 CLEAR
ALL
TYPE SETTING
Data
#
Registration
Select the country
by or button
Figure 1-25 All Clear and Type Setting
Display #8 CLEAR by
pressing or button
Set
Standby
Display #5 TYPE by
pressing or button
Stop
Set
1-40
Set
Set
Standby