Initialization Of Set Value (Clear); Overview - Canon Super G3 FAX Board-AK1 Service Manual

5
Service Mode Service Mode > Initialization of Set Value (CLEAR) > Overview

Initialization of Set Value (CLEAR)

Overview

You can select and initialize data by making the following selections; as a result, settings and
various parameter values will be reset to the factory settings.
Item Data to be initialized
TEL telephone number registration data (*1)
USSW SW user data and data registered under Service Mode #1 through #3.
of user data, the memory management data will not be deleted.
image data collected in memory will not be deleted.
SRV SW user data and data in Service Mode #1 through #3, #7.
NCU data under Service Mode #4.
SRV DATA system dump list data.
REPORT communication control report data.
ALL all settings/registered data (*1) except data under Service Mode #5 TYPE (*2).
COUNTER number of prints, number of sheets read.
*1: If the model is capable of storing addresses other than fax addresses, the telephone
number data will not be deleted upon execution of 'TEL' and 'ALL'.
To remove the telephone number data, use the host machine's service mode: COPIER
> FUNCTION > CLEAR > ADRS-BK.
*2: When 'ALL' is executed, the values suited to the destination of the machine will be
stored under 'TYPE'; in the case of Japan, 'standard'.
5 Service Mode > Initialization of Set Value (CLEAR) > Overview Service Mode
T-5-24
5-19
5-19