FAX-L350 Chapter 3: Maintenance and Service
2. HOW TO CLEAN PARTS
2.1 Main Unit Outer Covers
Lightly wipe the unit's outer causing with a clean, soft, lint-free cloth moistened with water or diluted
dishwashing detergent solution.
2.2 Separation Roller
Wipe with a soft, dry clean cloth.
2.3 Separation Guide
Wipe with a dry clean soft cloth.
2.4 White Sheet
Wipe with a soft, dry clean soft cloth.
2.5 Scanning Glass (Contact Sensor)
Wipe with a soft, dry clean cloth.
2.6 Paper Feed Guide
Wipe with a clean, soft, dry, lint-free cloth to remove any toner or paper debris.
Do not touch the transfer changing roller during cleaning. Otherwise, the print quality may
deteriorate.
If Separation roller, Separation guide and Paper pickup roller are very dirty, wipe with a cloth
moistened with Isopropyl alcohol (IPA). Do not use tissue paper. Dust from the tissue paper
causes static electricity.
Precautions when using Isopropyl alcohol (IPA)
When cleaning with IPA, take care to prevent the IPA from splashing high-temperature
parts. If IPA splashes high-temperature parts, leave for at least three minutes to allow the
IPA to evaporate.
3-4