Canon LASER SHOT LBP3210 User Manual page 77

1
2
2
2-44 Printing on Custom (Nonstandard) Paper Size
With the printing side facing up, insert about 2 cm of the edge
of paper into the manual feed slot
guides so that they are aligned with the width of the paper
The paper guides move together.
a
IMPORTANT
Be sure to align the paper guides with the width of the paper. If the paper guide is
too loose or too tight, this may result in misfeeds or paper jams.
While holding the paper with your hands as shown in the
figure, slowly insert the paper until it reaches the back of the
manual feed slot.
After the paper has been loaded, it is fed slightly into the printer.
, then slide the paper
a
b
.
b