Connecting To A Computer - Canon LASER SHOT LBP3210 User Manual

Connecting to a Computer

This section describes how to connect the printer to a computer.
1
As this printer is equipped with a USB connector, you can use a USB cable to
connect to a computer.
By using a USB cable, this printer can be connected to a computer equipped with
the USB port.
WARNING
When connecting or disconnecting the USB cable while the power plug is
plugged into the AC power outlet, do not touch the metal part of the connector.
This may lead to an electrical shock.
IMPORTANT
•
You can connect or disconnect the USB cable even while the power of the computer or
printer is turned ON. However, do not connect or disconnect the USB cable in the
following situations, as this may result in a computer or printer error:
- While the computer operating system is starting up immediately after the computer is
- During printing
•
If you connect or disconnect the USB cable while the power of the computer and printer
are turned ON, after disconnecting the USB cable, wait for 5 seconds or longer before
connecting it again. If you connect the USB cable immediately after disconnecting it, this
may result in a computer or printer error.
•
This printer performs two-way communication during printing. If the printer is connected
with a print server, a USB-hub switching device or others that require one-way
communication, it may result in printer error.
NOTE
•
The appropriate USB interface differs depending on the operation system of the
connected computer as follows. For more details, contact your local authorized Canon
dealer.
- Windows 98/Me: USB Full-Speed (USB1.1 equivalent)
- Windows 2000/XP/Server 2003: USB 2.0 Hi-Speed/USB Full-Speed (USB1.1
•
When you connect this printer to a computer with a USB cable, use a computer with
manufacturer's guarantee of USB proper operation.
•
This printer does not come with a USB cable. Have the appropriate one available for your
computer.
1-12

Connecting to a Computer

turned on
equivalent)