Canon LASER SHOT LBP3210 User Manual page 186

2
Specify the following items as needed:
[B & W Halftones]:
[Print Colored Text and Lines in Black]: Place a checkmark for this option when
[Enable Image Correction]:
[Toner Density]:
[Use Toner Save]:
3
Confirm the settings, then click [OK].
Select the display pattern of subtle
gradation (medium gradation) for
black-and-white data.
[Pattern 1]: Prints gray or colored text
clearly and prints photographic images
and graphics with smooth gradation. You
can obtain relatively stable printout
results.
[Pattern 2]: Prints with the density of
halftones appropriate to each text item,
diagram, table, graphic, and photographic
image.
[Pattern 3]: Select when text items,
diagrams, tables, or graphics appear too
thin or do not appear by selecting [Pattern
1] or [Pattern 2]. However, the diagrams,
tables, or graphics may appear darker
than when [Pattern 1] or [Pattern 2] is
selected or you may not be able to obtain
smooth gradation.
[None [Solid]]: Prints all colors in black,
except for white.
colored text or thin lines of CAD data etc.
drop out or appear broken in printouts. You
should be able to print thin lines finely.
When image data such as photographic
images are printed at enlarged sizes in
the application, the printed images can
look rough or jagged. Specify the settings
for smoothing the output of low-resolution
image data.
Adjust the toner density for the print data.
Adjust the density by dragging the [Toner
Density] slider from side to side.
By using this function, you can save toner
consumption, since some parts of the
data are omitted from the job.
Using the Printing Functions
4
4-41