Part 3: Operating Instructions
RESET button
This key has the following functions:
-To recover an error, press and hold down for
over two seconds.
-To start cleaning the print head, press and
hold down for over two seconds.
-To start the nozzle check pattern, double click.
Paper thickness lever
Adjusts the gap between the
printhead and the paper. Set
this lever according to the
type of print media that you are
using.
Paper thickness lever
Adjusts the gap between the print head and paper according to the thickness of the
paper. There are two settings: left for plain paper, high resolution paper,
transparencies, back print film, glossy paper or high glossy film and scanner
cartridge; and right for thick paper, envelopes, and banner paper.
Figure 3-16 Name of the Parts and Their Functions
Figure 3-17 Paper Thickness Lever
Left
Right
3-14
BJC-2000