Table of Contents
Advertisement
Part 3: Operating Instructions
3) Installing an ink cartridge
Take out the new ink cartridge from its package and remove the cap covering the ink
outlets as shown in the figure. Install the ink cartridge by following the removal
procedure in reverse.
CAUTION
Magenta Ink Outlet
Cap
Figure 3-9 Removing the Ink Cartridge Cap
Do not unpack the ink cartridge until it is ready to be used.
To prevent poor ink suction due to clogging of the joint pipes, never touch
the ink cartridge's ink outlets. After removing the cap from the ink
cartridge, promptly install the ink cartridge in the BJ cartridge to prevent
the nozzles from clogging due to dried-out ink and dust, etc. Do not
remove an ink cartridge from the BJ cartridge unless replacing.
Yellow Ink Outlet
(Contact Section
of the Joint Pipe)
(Contact Section
of the Joint Pipe)
Cyan Ink Outlet
(Contact Section
of the Joint Pipe)
Figure 3-10 Ink Cartridge Protection
Color Ink Cartridge
Black Ink Cartridge
Black Ink Outlet
(Contact Section
of the Joint Pipe)
3-8
BJC-2000
Advertisement
Table of Contents
