Replacing The Fuses - Yamaha YZF-R1Z Owner's Manual

NOTICE
To charge a VRLA (Valve Regulated
Lead Acid) battery, a special (con-
stant-voltage) battery charger is re-
quired. Using a conventional battery
charger will damage the battery. If
you do not have access to a con-
stant-voltage battery charger, have a
Yamaha dealer charge your battery.
To store the battery
1. If the vehicle will not be used for
more than one month, remove the
battery, fully charge it, and then
place it in a cool, dry place.
NOTICE: When removing the
battery, be sure the key is
turned to "OFF", then discon-
nect the negative lead before
disconnecting the positive lead.
[ECA16302]
2. If the battery will be stored for more
than two months, check it at least
once a month and fully charge it if
necessary.
3. Fully charge the battery before in-
stallation.
PERIODIC MAINTENANCE AND ADJUSTMENT
4. After installation, make sure that
ECA16520
the battery leads are properly con-
nected to the battery terminals.
NOTICE
Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.

Replacing the fuses

The main fuse, the fuel injection system
fuse, and the fuse boxes, which contain
ECA16530
the fuses for the individual circuits, are
located under the rider seat. (See page
4-21.)
1. Main fuse
2. Fuse box
3. Fuel injection system spare fuse
4. Fuel injection system fuse
7-33
2
1
EAU47311
3
4
7