Yamaha YZF-R1Z Owner's Manual page 25

To set the clock
1. Push the "SELECT" button and
"RESET" button together for at
least two seconds.
2. When the hour digits start flashing,
push the "RESET" button to set the
hours.
3. Push the "SELECT" button, and
the minute digits start flashing.
4. Push the "RESET" button to set
the minutes.
5. Push the "SELECT" button and
then release it to start the clock.
To display the stopwatch
To change the display to the stopwatch
mode, push the "SELECT" button and
"RESET" button together. To change
the display back to the clock mode,
push the "SELECT" button and "RE-
SET" button together; however, this is
not possible when the stopwatch is
counting.
Standard measurement
1. Push the "RESET" button to start
the stopwatch.
2. Push the "SELECT" button to stop
the stopwatch.
INSTRUMENT AND CONTROL FUNCTIONS
3. Push the "SELECT" button again
to reset the stopwatch.
Split time measurement
1. Push the "RESET" button to start
the stopwatch.
2. Push the "RESET" button or start
switch " " to measure split times.
Split times are displayed on the
odometer display for five seconds.
3. Push the "RESET" button or start
switch " " to display the final split
time or push the "SELECT" button
to stop the stopwatch and display
the total elapsed time.
Split time history
1. Coolant temperature display/air intake tem-
perature display
2. Stopwatch
4-8
The split time history displays up to 20
stored split times. The split time history
can be displayed either in reverse chro-
nological order or by speed.
1. Push the "SELECT" button for at
least one second to select the re-
verse chronological order mode;
"L-20" displays on the stopwatch.
Push the "SELECT" button again
to select the speed mode; "F-20"
displays on the stopwatch.
2. Push the "RESET" button. De-
pending on the selected split time,
"L20" or "F20" displays on the cool-
ant temperature display/air intake
temperature display, and its corre-
sponding stored split time displays
on the stopwatch.
3. Push the "SELECT" button to
move down, and the "RESET" but-
ton to move up through the list.
1
TIP
G
When displaying in the reverse
chronological order, the split times
are shown from the latest to earli-
2
est (i.e., L20, L19, L18, L17).
When displaying in the speed or-
4