Yamaha YZF-R1Z Owner's Manual page 64

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Turn signal light lead coupler
To install the cowling
1. Connect the turn signal light lead
coupler.
2. Fit the projections on the cowling
into the slots as shown.
7
2
1. Slot
2. Projection
2
1
1. Slot
2. Projection
3. Install the quick fasteners and the
quick fastener screws.
Cowlings C and D
To remove one of the cowlings
1 1. Remove cowling A (if removing
cowling C) or cowling B (if remov-
ing cowling D). (See page 7-9.)
2. Remove the
screws.
1
1. Cowling C
2. Quick fastener screw
3. Slide the cowling forward to un-
EAU47242
quick fastener
1. Slot
2. Projection
7-10
2 2
2 2
1
hook its projection from the slot,
and then pull the cowling off.
1
2