Handlebar Switches - Yamaha YZF-R1Z Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
G Neither throttle opening seg-
ments nor "R1" are displayed.
2. Push the "SELECT" button to con-
firm the selected throttle opening
position display activity. The dis-
play returns to the odometer or
tripmeter mode.
4

Handlebar switches

Left
1. Dimmer switch " / "
2. Turn signal switch " / "
3. Horn switch " "
Right
1
2
3
1. Engine stop switch " / "
2. Drive mode switch "MODE"
3. Start switch " "
4-15
EAU12348
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12400
/ "
" for the high
EAU12460
/ "
". When re-
EAU12500
"
EAU12660
/ "
" before starting
" to