LEDs and Switches
Buttons and Switches
Reset and Unit Identification Buttons
Each management module contains a reset button and unit identification button. Use
Figure D-8 and Table D-8 to identify the button locations and functions.
Figure D-8: Server blade management module (above)
and power management module (below)
Table D-8: Reset and Unit Identification Buttons
Item
Description
1
Reset button
2
Unit identification
button
Power Configuration Switches
The server blade management modules and power management modules have a
two-position switch that identifies the use of single or multiple power zones in the
rack environment.
D-10
Function
Reinitializes management
functions
Toggles UID LED between on
and off
HP ProLiant BL p-Class System Setup and Installation Guide