Pace TDC776D Operator's Manual page 41

Check
Can you see and hear a
DVD that you are trying
NO
to play?
YES
D
Is the picture low quality,
or "fuzzy", when you
YES
are expecting to see an
HDTV-quality picture?
NO
D
Can you see only regular
(analog) channels but not
YES
any digital channels?
NO
D
Are the DVR functions
NO
working?
Suggested solution
Check that all the audio and video cables are
securely and correctly connected, including
R
any to a home theater receiver that you may
be using to enhance the sound.
Some programmes may include "copy
protection" which means, if your set-top is
R
connected to your HDTV via the component
video jacks, the picture is downgraded to
standard TV quality. To prevent this from
happening, use an HDMI
TM
multimedia interface) connection instead.
The Bypass feature may be turned on (check
if the BYPASS light on your set-top's front
R
panel is lighted). If Bypass is on, turn it off
(using the Setup menu, if there is one, or the
appropriate button on your remote control).
The internal hard disk may be temporarily
R
disabled because the set-top has overheated.
Make sure the set-top is not overheating
(refer to the set-top's ventilation
requirements on page 4).
SOLVING PROBLEMS (cont.)
Further checks, if appropriate
(high definition
39