About Tv Display Capability (Resolution Settings) - Pace TDC776D Operator's Manual

About TV Display Capability (resolution settings)

• Your set-top can transmit pictures to your TV in a range of resolutions (also called "Display
Capabilities" - see below for the settings available). Generally, higher screen resolutions give better
quality pictures. However, the quality will always depend on how the program was originally
transmitted.
• Different TVs display different screen resolutions. For example, standard TVs display "480i", EDTVs
(Enhanced Definition TVs) display "480p" and most HDTVs display "1080i" or "720p". Many
HDTVs will display at more than one resolution. For more information, see the information
supplied with your HDTV.
You must make the appropriate TV Display Capability setting(s) on your set-top, so that it is
compatible with your TV. See the next page for full instructions.
In order to display the best picture every time, you should select every resolution that your TV is
capable of displaying. This should ensure that programs are displayed with the minimum distortion.
There are green lights on your set-top's front panel to show you the resolution of the picture for the
program your set-top is currently handling (a live program or one you are playing back).
TV Display Capability settings
• 480i is standard definition NTSC and is
transmitted in a 4:3 aspect ratio (see right)
• 480p is enhanced digital TV and can be
transmitted in either a 4:3 or 16:9 aspect ratio
• 720p and 1080i are HDTV and are
transmitted in a 16:9 aspect ratio (see right)
MAKING USER SETTINGS (cont.)
When your HDTV is connected
to your set-top via an HDMI
your set-top gets information
from your HDTV about the
HDTV's display capability. Your set-
top uses this information to adjust
its TV Display Capability settings.
Your set-top also records your
HDTV's ID (identification), so that
only one HDTV is supported at any
one time. When your HDTV has
updated your set-top's TV Display
Capability settings, you may change
them if you wish. Your changes will
then be stored with the ID.
You can restore your set-top's
TV Display Capability settings to
their factory values, as described
480i transmission:
on page 32. You can also restore
The aspect ratio is 4:3
your set-top to the settings that
your HDTV has passed to your
set-top. To do this you must first
restore the factory settings while
1080i transmission:
your set-top is disconnected from
The aspect ratio is 16:9
your HDTV, then reconnect your
HDTV via an HDMI
NOTE
,
TM
23
cable.
TM