Pace TDC776D Operator's Manual page 40

SOLVING PROBLEMS (cont.)
Check
Is the picture distorted
or too small?
NO
D
Can you display menus
and guides on the
screen?
YES
D
Is there any sound?
YES
D
Can you hear stereo
sound?
YES
D
Please see the next page
38
Suggested solution
Check that the TV Aspect Ratio and TV
Display Capability, as set on your set-top,
R
YES
are appropriate for your TV (see pages 21
through 25). Change them if necessary.
If your TV is connected to the VIDEO OUT
or S-VIDEO jacks, then you will see menus
R
NO
and guides only if the screen resolution 480i
is set to "Yes" and 480p, 720p and 1080i
are set to "No".
Check that the audio cables are securely and
correctly connected.
R
NO
First check that the program is likely to have
stereo sound (an old movie, for example, may
R
NO
not be in stereo).
Check the on-screen Setup Menu, Audio
settings (see page 35). The Stereo Output
may be set to "Mono". Change it to "Stereo".
Further checks, if there is still a problem
If your TV is a 16:9 TV, you can use Auto Pillarbox to add
black borders to 4:3 transmissions, so that the picture is
not stretched (see page 26).
If the TV Aspect Ratio and TV Display Capability settings
are correct, try using Zoom to improve the picture (see
page 34) or consult the instructions that came with your
TV and try adjusting your TV's display.
Use the front panel to check the user settings (see page
21) and change the TV Display Capability resolution
settings if necessary (see page 23).
Check that you have not muted the sound on your set-
top and/or TV. Adjust the volume control on your set-top
and/or TV. If you are using a home theater receiver, check
it is set up correctly.
If your TV is mono, you will hear stereo sound only if
you have a stereo audio amplifier and speakers or home
theater connected to your stereo VCR or set-top.