Turning Off; Memory Mode - Braun BP 3510 User Manual

8
5. The positioning system (A) shown on the left and
a beep confirm that you have reached the right
measuring position. The measurement will start
automatically. When the measurement is complete, a
beep will sound again, and the reading is displayed:
Upper (systolic) value
Lower (diastolic) value
Pulse
Please note:
• In case of system errors or handling mistakes, the
display will show an error code, instead of giving
you inaccurate results (for details, please see
section «What to do if...»).
• 15 seconds after switching on the appliance, the
measuring process will start automatically, even if the
appropriate measuring position has not been reached.

Turning off

Press the on/off button to turn the product off. Otherwise
the product will turn off automatically after 2 minutes.

Memory mode

Your blood pressure monitor can store the readings of
50 measurements. Storing is done automatically after each
completed measurement. The memory is non-volatile. This
means that you will not loose stored data when changing
batteries. The memory cannot be cleared. Once the
memory is full, the oldest values will be overwritten.
Recalling stored readings
To recall stored readings, first turn the product off,
then press the memory button (D). A single push (m or n)
will recall the latest reading. The lower display line
successively shows memory index and pulse on the one
hand and date and time of the respective measurement
on the other hand.
Repeatedly pressing the memory button (D) will call up
one by one all stored readings:
m (–) towards older readings
n (+) towards younger readings