Olivetti Fax_Lab 106 Instructions Manual page 52

8. To view the other available option, "LINE MONITOR -
YES", press the keys:
9. To confirm the setting, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
T
O REGULATE THE SPEAKER VOLUME
If the volume of the dialling tones and connection sig-
nals is too low or too high, regulate it using the
key.
1. Press the key:
The display shows:
2. To raise or lower the volume of the speaker, press the
key:
The display shows the volume level set on the top line.
3. To return the fax machine to its initial stand-by mode,
press the key:
T
O REGULATE THE BUZZER VOLUME
The buzzer indicates particular operating conditions and
faults or errors.
The volume of the buzzer may be set to eight levels, or
may be turned off altogether.
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
5 0
4. Press the keys:
The display shows:
5. Press the key:
The display shows:
6. Press the keys
until the display shows:
7. Press the key:
The display shows the preset volume level, for exam-
ple 4:
8. To turn the volume up/down, press the keys:
9. To confirm your choice, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
T /
O ENABLE DISABLE ECM
The ECM (Error Correction Mode) is a system for
correcting the errors caused by interference on the line.
This function only has effect if it has been enabled both
on your fax machine and on your correspondent's fax
machine and is indicated by a letter "E" appearing on
the display.
The fax machine is set up to send documents in this
mode. However, you can set it up to send documents in
normal mode, as follows:
1. Press the key:
The display shows:
2. Press the keys
until the display shows: