Olivetti Fax_Lab 106 Instructions Manual page 42

Table of Contents

Advertisement

7. To confirm the setting, press the key:
8. To return the fax machine to the initial stand-by mode,
press the key:
9. If you want to move back one function, press the key:
O
UTGOING MESSAGE ONLY
Using this function, whenever an incoming call is re-
ceived, the TAD plays the OGM 1 but does not record
any incoming messages.
You can use this function when you expect to be away
for a long time and it would not be possible to record all
messages received in your absence.
In this case, in place of the ordinary outgoing message,
it is advisable to record a different one, for example:
"From 22nd June to 19th September only faxes will be
accepted. No incoming messages will be recorded".
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. To confirm the setting, press the key:
The display shows:
6. To view the other available option, "ANNOUNCE ONLY
- YES", press the keys:
4 0
7. To confirm the setting, press the key:
The display shows:
8. To confirm the setting, press the key:
The display shows:
If you have already recorded OGM 1, the display will
show the message "PLAYING" and the TAD will play it
back.
If you have not recorded it, the display will show the
message "OGM NOT RECORDED".
9. To change the outgoing message recorded previously
or to record a new one, lift the handset.
The display shows:
10. To start recording, press the key:
The display shows:
S
ILENT RECEPTION OF INCOMING MESSAGES
Using this function you can receive messages confi-
dentially. In other words, the TAD receives messages
without playing them over the speaker so that any other
persons present cannot hear your messages.
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the key:
The display shows:
5. To view the other available option, "ICM ON SPEAKER
- YES", press the keys:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-lab 126

Table of Contents