Olivetti Fax_Lab 106 Instructions Manual page 48

T
O CHANGE THE LENGTH OF THE ACOUSTIC SIGNAL
This function is only enabled in some countries.
When the fax machine is set up for automatic recep-
tion with recognition of the type of call, it behaves
as follows:
• if it is being called by a fax machine, it will automatically
prepare to receive a document after the preset number
of rings
• if it is being called by a telephone, it will emit an acoustic
signal for a time of 20 seconds, after which, if you still
have not lifted the handset, it will automatically prepare
to receive a document.
If you want, you can change the length of the acoustic
signal as follows:
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. Press the keys
until the display shows:
7. Press the key:
The display shows:
8. To view the other available values, "FAX/TEL TIMER -
15 SECS", "FAX/TEL TIMER - 30 SECS" or "FAX/TEL
TIMER - 40 SECS", press the keys:
4 6
9. To confirm your choice, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
T
O CHANGE THE REMOTE CONTROL CODE
If the fax machine is connected to an extension that
operates in tone dialling mode and is set up for manual
reception, whenever there is a call from a corre-
spondent wishing to send you a document, you can set
it to receive the document by typing the code * * on the
extension. This operation has the same effect as press-
ing the key on the fax machine.
You can replace the second "asterisk" of this code us-
ing digits from 0 to 9.
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. Press the keys
until the display shows: