Mercedes-Benz ML320 Cdi Operator's Manual page 266

M-class
Hide thumbs Also See for ML320 Cdi:
Table of Contents

Advertisement

Switching the Downhill Speed
Regulation on/off
The switch is located in the lower part of
the center console.
1 DSR on/off
2 Indicator lamp
Warning!
If the accelerator pedal is depressed while
the Downhill Speed Regulation is activated,
the vehicle can drive faster than the pro-
grammed set speed. You should therefore
drive downhill with particular caution as it
could otherwise lead to an accident and/or
serious injury to you or others. Keep in mind
that as soon as you remove the foot from
the accelerator pedal with the DSR switched
on, the DSR will start regulating the vehicle's
speed including use of brakes if required.
Depending on the programmed set speed,
actual vehicle speed and gradient, the DSR
can cause the vehicle to slow down rapidly.
Sudden and unexpected deceleration can
result in loss of vehicle control, causing an
accident and/or serious personal injury to
you and others.
Controls in detail
Switching Downhill Speed Regulation on
G
i
The DSR can only be switched on if the vehi-
cle speed is below 18 mph (Canada: 30 km/h).
Press DSR switch 1 ( page 265).
The indicator lamp 2 comes on.
The message
DSR
pear in the multifunction display.
i
If the DSR is switched on at a speed above
18 mph (Canada: 30 km/h), the message DSR
Max. speed 18 mph (Canada: 30 km/h) ap-
pears in the multifunction display.
For information on how to program the set
speed while driving, see "Adjusting Down-
hill Speed Regulation speed with DSR
switched on" ( page 266).
Driving systems
and the set speed ap-
265

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ml350Ml63 amgMl 500Ml 320 cdiMl 350

Table of Contents