Trip Computer Menu - Mercedes-Benz ML320 Cdi Operator's Manual

Controls in detail
Control system
Press button æ or ç repeatedly
until the desired speed is shown in the
multifunction display.
When DSR is switched on, DSR will use
the programmed default speed to regu-
late the vehicle's speed.
i
Once DSR is switched on, you can adjust the
set speed using the cruise control lever
( page 266).
180

Trip computer menu

Use the trip computer menu to call up
statistical data on your vehicle.
The following information is available:
Function
Fuel consumption statistics
from start
Fuel consumption statistics
since the last reset
Distance to empty
i
When you enter the trip computer menu, you
will always see the fuel consumption statistics
from start first.
Fuel consumption statistics from start
Press button ÿ or è repeatedly
until the message
in the multifunction display.
Page
180
181
1 Distance driven since start
2 Time elapsed since start
181
3 Average speed since start
4 Average fuel consumption since start
i
All statistics stored since the last engine
start will be reset approximately 4 hours after
the SmartKey in the starter switch is turned to
position 0 or removed from the starter switch.
Resetting will not occur if you turn the SmartKey
back to position 1 or 2 within this time period.
From start appears