Control System; Multifunction Display - Mercedes-Benz ML320 Cdi Operator's Manual

Control system

The control system is activated as soon as
the SmartKey in the starter switch is
turned to position 1 ( page 40) or as
soon as the KEYLESS-GO start/stop but-
ton* is in position 1 ( page 42). The con-
trol system enables you to
call up information about your vehicle
change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for maintenance service, to set the
language for messages in the instrument
cluster display, and much more.
i
The displays for the audio systems (radio,
CD player) will appear in English, regardless of
the language selected.
Warning!
A driver's attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
The control system relays information to
the multifunction display.
Controls in detail

Multifunction display

G
1 Trip odometer
2 Main odometer
3 Transmission position indicator
4 Current transmission program mode
5 Status indicator (outside temperature
or digital speedometer)
For more information on menus displayed
in the multifunction display, see "Menus"
( page 150).
1
AMG vehicles only.
Control system
1
147