Installation; Unpacking; Remove The Transport Supports; Cleaning - Electrolux ERES31800 Instruction Book

Electrolux refrigerator instruction manual
Table of Contents

Advertisement

Lowest permissible water
pressure. 2,5 bar (250kPa)
Highest permissible water
pressure. 5 bar (500kPa)
Do not connect the refrigerator in spaces where ambient temperature can
decrease to below freezing.
The refrigerator may only be connected to drinking water supplies.
The refrigerator may only be connected to cold water supplies.

INSTALLATION

Unpacking

Unpack the cabinet and check that it
is in good condition and free of any
transport damage. Notify the dealer
immediately of any damage. Hand the
packaging over for recycling. For more
information, contact your local council
or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.

Remove the transport supports

Remove the tape and the transport
supports from
·
the door sides
·
inside the door hinges
·
the shelves
Remove the transport support on the
glass shelf by pushing the support
forward along the edge of the shelf
until it stops. Take hold of the rear
edge of the glass shelf and pull the
shelf and transport support forward
until the shelf tilts and the transport
support can be removed. Some
models are fitted with a silencing pad
Consult your installer if water pressure is
less than 2,5 bar.
If water pressure exceeds 5 bar, than a
reduction valve must be fitted (available
from your specialist shop).
under the cabinet. Do not remove this
pad.

Cleaning

Wash the inside of the cabinet using
lukewarm water, a mild washing-up
detergent and a soft cloth.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents