Adding A Label Frame - Brady GLOBALMARK User Manual

Landscape
Portrait
Choose OK when your settings are complete. If your label width is
larger than the printable area of your tape supply, the system displays a
message that provides the maximum size you can use.
Choose Cancel to return to the Editor window without making
changes to the label.

Adding a label frame

You can add a frame around the edge of a label in the shape of a
rectangle or a rectangle with rounded corners. This is a sample label
with a rounded rectangle frame added:
Figure 6-15. A sample label with a frame.
You can make the frame line thick or thin, and if you have the
Multicolor or Color & Cut system, you can set a color for the line. If you
have the Color & Cut system, you can also cut out the label around the
frame boundaries. See Cutting Around Label Frames on page 10-10
for instructions.
Sets the label to print in Landscape mode,
where the height of the label is the width of
the tape supply. This is the default.
Sets the label to print in Portrait mode,
where the width of the label is the width of
the tape supply.
6
Working with Labels
33
-