Table of Contents
Advertisement
Removing the Stylus Holder
Follow these instructions to remove the stylus for adjusting, cleaning, or
replacing.
Step 1:
Turn the power off, then open the printer.
Step 2:
Move the stylus holder mechanism to the center of the track, to make it
easier to work with.
Step 3:
To disengage the stylus holder, turn it one-half turn (180
shown in Figure B-1. The tab that engages the holder in the mechanism
becomes visible when the holder is disengaged.
Step 4:
Pull straight up to remove the stylus holder from the tracking
mechanism.
Tracking mechanism
Figure B-1. Removing the stylus holder.
°
) clockwise, as
Stylus
holder
Cutter Maintenance
B
3
-
Advertisement
Table of Contents
