To Refit The Driven Pulley; Drive-Belt - PIAGGIO Fly 150 4T Workshop Manual

Engine
Refitting the driven pulley
- Reassemble the clutch bell and spacer.

Drive-belt

During the wear checks foreseen in the scheduled
maintenance services at 6,000 km; 18,000 km;
etc., check that the rim bottom of the toothing does
not show signs of incisions or cracking (see figure):
The rim bottom of the tooth must not have incisions
or cracking; if it does, change the belt.
- Check that the driving belt is not damaged.
- Check the width of the belt.
Specification
Minimum width
Standard width
ENG - 94
B
ELT SIZE
Desc./Quantity
22.5 ± 0.2 mm
Fly 125 - 150 4T
21.5 mm