Table of Contents
Advertisement
Installing the VG248
You must install the VG248 into your network, connecting it to both the IP
network and the analog devices.
Before installing the VG248, review the important site and safety information in
Chapter 2, "Preparing to Install the VG248."
These sections provide instructions for safely installing the VG248:
Installing the VG248
You have the option of installing the VG248 in a 19-inch rack or setting it on a
shelf or other flat surface. Refer to these sections for detailed instructions:
Installing the VG248 in a Rack
The VG248 includes the brackets and screws required to install it in a 19-inch
rack. Follow these instructions to install it safely and securely.
78-13154-01
Installing the VG248, page 3-1
•
Connecting the VG248 to the Network, page 3-6
•
Verifying Installation, page 3-11
•
Installing the VG248 in a Rack, page 3-1
•
Setting the VG248 on a Shelf or Table, page 3-6
•
Cisco VG248 Analog Phone Gateway Hardware Installation Guide
C H A P T E R
3
3-1
Advertisement
Table of Contents
