Horizon Fitness T202 Owner's Manual page 9

ASSEMBLY STEP 4
HArDWArE BAG 4 CONTENTS :
BOLT (E)
SPRING WASHER (C)
15 mm 15 mm
Qty: 4
Qty: 4
ASSEMBLE
LEFT SIDE
FIRST
A
FLAT WASHER (D)
B
15 mm
Qty: 4
C
D
CONSOLE
E
CONSOLE CABLES
FLAT WASHERS (D)
F
SPRING WASHERS (C)
BOLTS (E)
CONSOLE MAST
Disengage the deck lock latch with your
foot to lower the running deck.
Open hardware bag 4.
gently place the console on top of the
console masts. Attach the left side first
using 2 bolts (e), 2 spring washers (c)
and 2 flat washers (d).
Connect the console cables, carefully
tucking wires in masts to avoid damage.
Attach the right side of the console
using 2 bolts (e), 2 spring washers (c)
and 2 flat washers (d).
NOTE: Be careful not to pinch any wires
while assembling the masts.
Before the first use, lubricate the treadmill
deck by following the instructions in the
MAINTENANCE section in the TREADMILL
gUIDE.
YOU ARE FINISHED!
9