Replacement Of Pivot Covers - Nautilus Commercial TreadClimber TC916 Service Manual

mechanIcal ServIce

10.0 - replacement of pIvot coverS

parts affected:
• Right Pivot Cover - P/N 17660
• Left Pivot Cover - P/N 17661
tools needed:
• 3/16 Allen Wrench
• 5/32 Allen
• 1/8 Allen
• Phillips Screwdriver
10-1: Remove Rear Step (P/N -17733) and Step Plate (P/N - 17591).
10-2: Remove Rear Plastic Cover (P/N - 17659).
10-3: Remove right Treadle Cover (P/N - SM17731 and P/N - SM17666), then remove the left Treadle Cover (P/N - SM17332
and P/N - 17667).
10-4: Remove right and left Upright Lower Plastic Pivot Covers (P/N - SM17657 and P/N - 17578).

See Figure 1 for Steps 10-1 thru 10-4.
figure 1
Treadle Top Cover
Lower Plastic Cover
Upright Attachment
Bolts
Rear Step
Rear Plastic Cover
• 3/4 inch Socket
• 3/4 inch Wrench or Open Ended Wrench
• Wedge support or flat head screwdriver to use as
a wedge
Treadle Top Cover
Lower Plastic Cover