Finely Chopping Small Quantities; Cleaning; Storage - Moulinex Odacio 3 Instructions And Recipes Manual

Hide thumbs Also See for Odacio 3:
Table of Contents

Advertisement

8
FINELY CHOPPING SMALL
QUANTITIES (DIAGRAM 8)
Accessory used
(Depending on model)
• Mini-chopper (K), Grinder (L)
Fitting the Mini-chopper or Grinder
• Press the release button (A4) to open
the Liquidiser drive cover (A1).
• Put the ingredients in the bowl (K2
or L), and lock the lid (K1 or L) on
the bowl.
• Fit the accessory on the Liquidiser
drive (A2) (You will hear an
audible click).
If the lid is not fitted correctly, the
appliance will not start.
Usage and practical tips for the
mini chopper
• Press the "mini chopper" symbol on
the speed selector (A5).
• "Auto pulse" means the food is
automatically processed in short
bursts to ensure the best results.
• To stop the appliance press "O" (A7).
13
With the mini-chopper you can:
• chop in seconds: garlic cloves, herbs,
parsley, dried fruits, bread, ham,...
• prepare baby foods.
• Maximum quantity of dried foods
(hazelnuts, almonds...): 80 g.
This mini-chopper is not designed to
take hard ingredients such as coffee
beans and hard spices.
Usage and practical tips for
the grinder
With the grinder you can:
• grind in seconds: coriander, pepper,
Cayenne pepper, dried apricots...
• Quantity / Maximum time for dried
apricots: 140 g / 10 sec.
• The grinder is not suitable for
coffee beans.
• Press the "booster" button (A6) to
process food. Releasing pressure on
the button stops the appliance.
To remove the accessory from the
appliance, press the release button (A4).

CLEANING

Unplug the appliance.
To make cleaning easier, rinse the
accessories straight after use.
The bowl, liquidiser jug and their lids
and handles are all dishwasher safe.
For ease of cleaning the handles
are detachable.
Do not put the rubber seal in a
dishwasher. Clean it separately using
warm water and washing up liquid.
When refiitting the rubber seal, ensure
that the thin lip faces upwards.
The accessories are all dishwasher
safe, except for the balloon whisk (F).
All other accessories can be cleaned
in the dishwasher (upper shelf only).
For ease of cleaning, the accessories
can be placed in the storage basket
(N) and then put in the dishwasher.
To clean the balloon whisk (F) carefully
detach the whisk drive (F1) from the
whisk (F2) by gently pulling them apart.
The whisk drive (F1) should NOT be
submerged in water and should be
cleaned carefully using warm water and
washing up liquid. The whisk (F2) can
be submerged in warm water containing
washing up liquid and can be cleaned
using a cloth or washing up brush.
Important: Do not allow water to run
into the drive section on the top of the
balloon whisk.

STORAGE

Your Odacio food processor has:
a storage basket (N) that fits inside
the bowl assembly (B). You can store
the grating/slicing/french fries disc
(E2), the disc holder (E1), the metal
blade (D1) as well as the spindle (C).
Alternatively, to wash and dry the
accessories, pour some hot water
containing a few drops of washing
up liquid into the mixer bowl or
liquidiser jug. Close the lid. Operate in
short bursts by using the pulse button
several times. Unplug the appliance.
Rinse the accessory, bowl or jug
under running water and leave to dry.
For ease of cleaning and storage, the
bowl handle (B4) and the liquidiser jug
handle (I4) are detachable (and dish
washer safe).
Over time the strong coloured natural
juices from food such as carrots and
beetroot may stain the plastic parts –
this is normal. These parts may be
cleaned by soaking in mild bleach
(non abrasive) straight after use, or
alternatively you can gently rub these
parts (taking extra care with any
blades) with a cloth dipped in cooking
oil and then wash as normal.
Do not submerge the motor unit (A)
or the balloon whisk drive (F1) in
water or place near running water.
Wipe the motor unit with a damp
cloth, clean the balloon whisk as
instructed opposite.
The blades on the accessories
are very sharp. Always handle
with care.
Cord storage is incorporated in the
motor unit: store the supply flex and
adjust it to the required length by
pushing or pulling it out of the base.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfc7

Table of Contents