Initial System Start-Up; Adjusting Volume; Lowering Volume Quickly; Setting The Time And Calendar - Alpine CDA-117 Owner's Manual

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
1
Turn off the unit power.
2
Press  (OPEN) to open the front panel, and then remove
it.
3
Press RESET with a ballpoint pen or similar pointed object.

RESET switch

Adjusting Volume

1
Turn the Rotary encoder until the desired sound is
obtained.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level
by 20 dB.
1
Press MUTE to activate/deactivate the MUTE mode.

Setting the Time and Calendar

1
Press and hold SETUP for at least 2 seconds to activate the
SETUP selection mode.
2
Turn the Rotary encoder to select the General mode, and
then press ENTER.
*1
 General  Display  Tuner
Bluetooth
*5
 Bluetooth
SIRIUS
Displayed only when INT Mute is OFF, and the mode is set to
other than Bluetooth Audio.
Not displayed when HD Radio Tuner module is connected.
Only when HD Radio Tuner module is connected.
Only when XM Radio is connected.
Only when SIRIUS Radio is connected.
3
Turn the Rotary encoder to select Clock Adjust, and then
press ENTER.
4
Turn the Rotary encoder to set year.
5
Press ENTER.
6
Repeat steps 4 and 5 above to set month, day, hour and
minute.
8
-EN
7
Notes
• Pressing ESC returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
• To synchronize the clock to another clock/watch or radio time
*2 *3 *4
 XM
/HD Radio /
Press and hold SETUP for at least 2 seconds to return to
normal mode.
announcement, press and hold ENTER for at least 2 seconds after
setting the "hour". Minutes will reset to 00. If the display shows over
"30" minutes when you do this, the time will advance one hour.