Machine Control Buttons; Operation Buttons; Function Buttons - Singer H74 Instruction Manual

MACHINE CONTROL BUTTONS

A. Operation buttons
1. Start/stop button
Press this button to start or stop the machine.
2. Thread cutter button
Press this button after finishing sewing and the machine will trim the threads.
3. Reverse button
Hold down this button to sew stitches in reverse or sew reinforcement stitches at a low speed.
4. Auto-lock button
Hold down this button to sew locking stitches immediately or at the end of the current patterns
and automatically stop.
5. Needle up/down position button
Press this button to move the needle to either up or down position. Needle will be programmed
to stop in selected position until button is pressed again.
B. Function buttons
6. Mode selection button
Press this button to select direct mode, utility and decorative pattern mode, block letter mode,
script letter mode and outline letter mode.
7. Stitch width adjustment buttons
Press this button to adjust the width of the zigzag stitch.
(see page 24/25/26)
(see page 27/28/29)