Controlling Network Roaming - Kyocera KX440 series User Manual

– alerts you with three
Any Change
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
→
Select
1. Menu Settings
.
Roam Ringer
Highlight
2. Enabled
a sample of the ringer.
Press to set the ringer.
3.
Setting Call Guard to avoid
roaming calls
You can set your phone to warn you before you
answer or place a call while roaming.
→
• Select
Menu Settings
→
Call Guard Call prompt
The phone makes a distinctive ring to indicate an
incoming call while you are roaming, and you
must press to accept the call or to place a
call while roaming.

Controlling network roaming

Specifying digital or analog mode
You may force the phone into either digital or
analog mode. This is useful if you are in an area
that borders on digital service and the automatic
feature is causing the phone to keep switching
between modes.
22
→ →
Sounds
and press . You'll hear
→
Convenience
.
Select
1. Menu
Digital/Analog
Select an option and press
2.
–
Automatic
phone between digital and analog.
–
Analog only
analog mode only.
–
Analog call
for the duration of the next call.
–
Digital only
digital mode only.
Turning roaming on or off
This setting allows you to control the phone's
roaming feature by specifying which signals the
phone will accept.
1. Select
Menu
Roam Option
→
2. Select an option and press
–
Automatic
any system the phone service provides.
–
No Roaming
receiving calls outside of your home
service area.
If your phone has more than one setting for
Note:
Automatic, contact your service provider to
determine which one to use.
→ →
Settings Network
.
.
automatically switches the
sets the phone to work in
forces a call into analog mode
sets the phone to work in
→ →
Settings Network
.
.
(recommended setting) accepts
prevents you from making or
Making and Answering Calls
→
→