Silencing Call Alerts; Speakerphone - Kyocera KX440 series User Manual

Modifying or erasing a group
Start at the home screen.
Press the walkie-talkie button.
1.
Highlight
2.
.
Highlight the group from the list.
3.
Press to select
4.
Select an option:
5.
– To modify the group name or the list of
group members, select
. Options are
Options
Add New Members
– To erase the entire group, select
Make your changes and press
6.
or
Save Delete.

Silencing call alerts

If your phone is set to silent mode, it vibrates to
alert you of incoming BREWChat direct calls. The
speakerphone is turned off, so the caller's voice
comes through the earpiece. To use silent mode,
see "Silencing all sounds" on page 39.
User Guide for Kyocera KX440 Series Phones
Options.
Then select
View.
Remove contacts,
, and
Edit Name.
Delete.
to select

Speakerphone

BREWChat calls come through the speakerphone
behind the number keys on your phone.
If a headset or hands-free car kit (sold
Note:
separately) is connected to the phone, calls come
through the hands-free device and you speak
through the headset or microphone. However,
you must press the walkie-talkie button on the
phone to participate in BREWChat calls.
Adjusting speakerphone volume
• Press the volume key on the left side of the
phone up or down during the call.
Turning speakerphone off and on
• To turn speakerphone off for BREWChat calls,
press the speakerphone button on the top of
the phone. appears at the top of the
screen. The other party's voice comes through
the earpiece.
The speakerphone is off for all BREWChat
calls until you turn it on again.
• To turn speakerphone on, press the
speakerphone button.
of the screen.
appears at the top
15