Setting Roaming Alerts And Ringers; Controlling Network Roaming - Kyocera SoHo User Manual

Setting roaming alerts and
ringers
Setting an alert for roaming
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
→
Select
1. Menu Settings
.
Roam/Svc Alert
Select an option and press
2.
– alerts you with three tones
When no svc
decreasing in pitch when service is lost and
three tones increasing in pitch when service
is acquired again.
–
On roam change
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
–
On any change
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
→
Select
1. Menu Settings
.
Roam Ringer
Highlight to hear the ringer.
2. Enabled
Press to set.
3.
12
→ →
Network
.
alerts you with two
alerts you with three
→ →
Sounds
Setting Call Guard to avoid roming calls
You can set the phone to warn you before you
answer or place a call while roaming.
→
• Select
Menu Settings
→
Call Guard Call prompt
– The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
– To accept or place a call while roaming, you
must press
This functionality is disabled when the phone
Note:
is in emergency mode.

Controlling network roaming

Specifying digital or analog mode
Depending on services available from your service
provider, you may set the phone to either digital or
analog mode. This is useful if you are in an area
that borders on digital service and the automatic
feature is causing the phone to keep switching
between modes.
→
Select
1. Menu Settings
.
Digital/Analog
Select an option and press
2.
– automatically switches the phone
Automatic
between digital and analog.
– sets the phone to work in
Analog only
analog mode only.
– forces a call into analog mode
Analog call
for the duration of the next call.
– sets the phone to work in digital
Digital only
mode only.
Making and Answering Calls
→ →
Convenience
.
.
→ →
Network
.