Understanding Appended Messages; Adding A Signature; Creating Messages; If You Cannot Send Messages - Kyocera KX440 series User Manual

– —Save the message in
Save Message
your folder. This prevents the
Saved
message from being deleted if you have
activated AutoErase, and enables you to
send the message to others.
–
Save AutoText
have just entered as a prewritten message,
then return to the message entry screen so
you can send the message.
When you have finished setting options,
2.
press to return to the message window.
Highlight and press
3. Send

Adding a signature

This setting allows you to create signature text.
The signature does not appear in the message
creation screen; however, the signature is
included at the end of all outgoing messages.
To create a signature
→
Select
1. Menu Settings
.
Signature
Enter your signature in the text field.
2.
Press to save the setting.
3.
The signature text is tallied by the
Note:
character counter because the signature is
included in the text field.

If you cannot send messages

You may not be able to send or receive messages
if your phone's memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See "Erasing
messages" on page 35.
32
— Save the message you
.
→
Msg Settings

Understanding appended messages

If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
You are charged for each message
Important:
segment. When you start a message, the maximum
character limit ("160" in the example) appears
above the text entry screen. This number counts
down as you enter characters, until it reaches 0.
If you continue to enter text after this counter
reaches 0, a message segment may be appended.
If a segment is appended, a message will appear
on the phone screen.
Receiving incoming calls while
→

creating messages

You may receive standard or BREWChat calls
while creating messages.
BREWChat barge call
When your phone receives a BREWChat barge call,
it sounds a tone and you hear the the caller's voice
through the speakerphone.
• To speak, press and hold the walkie-talkie
button. To listen, release the walkie-talkie
button. To end the call, press
Once the BREWChat call has ended, your phone
returns to the text message screen that was open.
Sending and Receiving Text Messages
Characters
remaining
Text entry field
or .