Krell Industries Showcase Owner's Reference Manual page 63

System Configuration,
Bass Peak Limiter Setup
Bass Peak Limiter Setup
Screen
Krell Showcase Processor
continued
The
BASS PEAK LIMITER SETUP
option or
ON OFF.
mum amount of .1 (or LFE) and redirected bass that is sent to your
subwoofer. If you do not have a subwoofer, this option limits the max-
imum amount of 1 (or LFE) and redirected bass that is sent to your
full range front and/or surround loudspeakers.
Select
BASS PEAK LIMITER SETUP
PEAK LIMITER SETUP
When you select
direction key to increase the output of the noise generator. Select the
volume level limit (0-90) by increasing the noise generator until the
bass sounds distorted. Then set your selection at that level, or slightly
below.
After setting your selections, press the previous key (74) once to
return to the
OPERATION
menu lets you turn the bass peak limiter
When this option is
ON,
from the
screen appears,, with the cursor blinking at
SHOWCASE
-BASS PEAK LIMITER SETUP-
BASS PEAK LIMITER
BASS PEAK LEVEL
the
ON, BASS PEAK LEVEL
screen.
you can then set the maxi-
menu. The
OPERATION
OFF
N/A
reverts to 0. Use the up
BASS
OFF:
59