Krell Industries Showcase Owner's Reference Manual page 2

Surround preamp/processor
Table of Contents

Advertisement

Showcase Processor
Surround Preamp/Processor
Instructions for Use
v 02.3
CONTACT
INFORMATION
WARNINGS
2002 by Krell Industries, Inc. All rights reserved
©
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-799-9954
FAX 203-891-2028
E-MAIL krell@krellonline.com
WEBSITE http://www.krellonline.com
This product complies with the EMC directive (89/336/EEC) and the low-voltage
directive (73/23/EEC).
The Showcase Processor must be placed on a firm level surface where it is not
exposed to dripping or splashing.
The ventilation grids on the top and bottom of the Showcase Processor must be
unobstructed at all times during operation. Do not place flammable material above
or beneath the component.
Do not remove or bypass the ground pin on the end of the AC power cord. This
could cause radio frequency interference (RFI) to be introduced into your playback
system.
Before making connections to the Showcase Processor, make sure the back panel
power switch is off. Make sure all cable terminations are of the highest quality and
free from frayed ends, short circuits, or cold solder joints.
THERE ARE NO USER SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.
Please contact your authorized Krell dealer, distributor, or Krell if you have any
questions not addressed in this Owner's Reference.
DTS Digital Surround ™ is a discrete 5.1 channel digital audio format available on CD, LD, and DVD soft-
ware which consequently cannot be decoded and played back inside most CD, LD, or DVD players. For this
reason, when DTS-encoded software is played back through the analog outputs of the CD, LD, or DVD play-
er, excessive noise will be exhibited. To avoid possible damage to the audio system, proper precautions
should be taken by the consumer if the analog outputs are connected directly to an amplification system. To
enjoy DTS Digital Surround ™ playback, an external 5.1 channel DTS Digital Surround ™ decoder system
must be connected to the digital output (S/PDIF, AES/EBU, or TosLink) of the CD, LD, or DVD player.
This product is manufactured in the United States of America. Krell
Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. Krell
Smart System Setup™ is a trademark of Krell Industries, Inc. "DTS", "DTS Digital Surround", "DTS ES
Extended Surround", and "Neo:6" are registered trademarks of Digital Theater Systems, Inc. TosLink is a
trademark of Toshiba Corporation. Manufactured under license from Dolby Laboratories. "Dolby," "Pro
Logic," and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
Copyright 1992–1997 Dolby Laboratories, Inc. All rights reserved. THX is a registered trademark of
Lucasfilm, Ltd. Re-Equalization, Timbre Matching, and Decorrelation are trademarks of Lucasfilm, Ltd. All
other trademarks and trade names are registered to their respective companies.
®
is a registered trademark of Krell
P/N 306040

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Showcase series

Table of Contents