OWNER'S MANUAL
Setting up TV stations(CANAL+ SET-TOP Box use only)
-To watch the TV by using the CANAL+ SET-TOP Box.
How to connect a SET-TOP Box.
• Connect an antenna or coaxial cable to
ANTENNA Jack on the rear of the CANAL+
SET-TOP Box.
• Connect the SCART CABLE between
CANAL+ SET-TOP and TV SCART jack..
Setting up TV stations(CANAL+ SET-TOP Box use only)
Press the MENU button and then press the VOL+/- button to select ETC menu.
Press the PR - button.
1
Press the PR+/- button to select AUTO AV and then press the VOL(+) button.
2
Press the PR+/- button to select the desired mode.
3
Press the ENTER button.
T i p s
• If you directly connect the ANTENNA or coaxial cable to ANT jack of TV.
You must select "OFF" states of the "AUTO AV" on OSD MENU.