Safety Instructions Contents Safety Instructions General Safety Precautions Front Panel Rear Panel Accessory Remote Control Unit Basic Remote Control Operation 11-14 Connecting to Home Power Connecting to Car Power Connecting to Watch TV,VCR or DVD Changing the INPUT SELECT standard PICTURE SELECTION Changing the Picture Standard Adjusting the Picture Settings...
General safety precautions General safety precautions 16. Do not install it at the unstable location such as on the bouncing prop or tilted place. Thank you for purchasing our product. It may be tipped over as it loses balance or damaged as it is fallen down. Before using it, please read this user's manual carefully and apply it correctly and safely.
Front Panel Rear Panel Rear Front 1. DC 12V To input DC power from power outlet. 2. PC D-SUB Use to connect a video signal from a personal computer 3. PC AUDIO Connects to the sound-output port of a personal computer. 4.
Accessory Remote Control Unit 1. SOURCE Button 2. MULTI Button 3. PC Button 4. LANGUAGE Button 5. PICTURE Button 6. SLEEP Button 7. MENU Button 8. M/S Button 9. Two digit Button 10. Numeric Buttons 11. Teletext Buttons Power Sources-This product should be operated only from the type of power source 12.
Basic Remote Control Operation Basic Remote Control Operation 1. Source Button 9. Tow digit Button Select input source. 1) -/-- key selects one-digit (0 to 9) or two-digit program number (10 to 99) 2) (-) or (--) is displayed by turns on the upper right position if you press this 2.
Page 8
Basic Remote Control Operation Basic Remote Control Operation 16. S-STD Button 22. Display Button Whenever this button is pressed, the mode will be changed as follows. When TV mode displays the current channel number, picture mode, sound mode, sleep and clock. 17.
Connecting to Home Power Connecting to watch TV, VCR or DVD Connecting a DVD Player (Connecting to Y, P Make sure that the set s MAIN 1. Connect a set of audio cables between the component AUDIO IN jacks on the TFT POWER is switched OFF before LCD TV and the AUDIO OUT jacks on the DVD Player.
Changing the INPUT SELECT Standard Changing the Picture standard You can select the type of INPUT which best corresponds to your viewing requirements. You can select the type of picture which best corresponds to your viewing requirements. The following picture effects are available the order given: The following picture effects are available the order given: TV, AV, S-VIDEO, COMPONENT, PC STANDARD, DYNAMIC, MILD, USER...
Changing the Sound Standard Selecting the Sound Mode (depending on TV mode) You can select the type of special sound effect to be used when watching a given broadcast. The "M/S" button displays/controls the processing and output of the audio signal. The following sound effects are available in the order given: When power is switched ON, the mode is automatically preset to either "Dual"...
Setup Setting Setup Setting MANUAL PROGRAM AUTO PROGRAM When storing Channels manually, you can You can scan the frequency ranges available on your choose whether or not store each of the channels television in your country and store all the channels found found.
Setup Setting TIME Setting 1. Press the MENU button. PROGRAM EDIT 2. Press the PROG[ ] or PROG[ ] button to select "TIME". 3. Press the VOL[ - ] button. You can create channel list at this menu and it is Result: The "CLOCK"...
Function Setting PC SETTING Language Setting When the screen is unstable in PC settings, or to make your PC sta- Press the Menu button. ble by adjusting the Clock and Phase, set the PC in the following 2. Press the PROG[ ] or PROG[ ] buttons sequence: to select “FUNCTION”...
Connecting a PC Teletext Decode Note: The teletext feature dose work with TV, AV, S-Video signals. Most television channels carry "teletext", pages of written information that provide information such as: Television program tables News bulletins Weather forecasts Sports results Subtitles for the hard of hearing The teletext pages are organized according to six categories: Part contents...
Page 16
Selecting a Specific Teletext Page Displaying Teletext Information NOTE: The teletext feature dose work with TV, AV, NOTE: The teletext feature dose work with TV, AV, S-Video signals. S-Video signals. You can watch teletext information at any time, but sig- Press the numeric buttons on the remote control to nal reception must be good.
APPENDIX A: Display modes Using FLOF to Select a Teletext Page NOTE: The teletext feature dose work with TV, AV, If the signal from the system equals to the standard signal mode, the screen is adjusted auto- S-Video signals. matically. If the signal from the system doesn't equal to the standard signal mode, adjust the mode with referring to the videocard user guide because the screen might not display or only The various included in the teletext pages are color-coded, the power LED might be on.
APPENDIX B: Troubleshooting APPENDIX B: Troubleshooting If you have a problem setting up or using your LCD TV, you may be able to solve it yourself. Problem Suggested Actions Before contacting customer service, try the suggested actions that are appropriate to your problem. Check the volume level.
APPENDIX C : Specification SPECIFICATION Panel Type 20.1" TFT Color LCD Display Area 408.0mm x 306.0mm Display Color 16.7 million Pixel Pitch 0.6375 x 0.6375 x RGB mm Panel Recommended Resolution 640 x 480 Analog RGB 15 pin D-sub PC Audio Input Composite Input Video S-Video In...