Turning On The Tv; Checking Features - AWA TFTD66 Owner's Manual

Turning on the TV

- When using the remote control, aim it at the sensor on the TV.
Turning on the TV just after installation
1
Connect power cord correctly. At this moment, the TV is switched to Standby mode.
2
Press the POWER button on the TV or press the POWER Button or associated with TV
button on the remote control and then the TV will be turn on.
Turning on the TV (power cord is still connected)
1
If the TV is turned off with the remote control button or POWER ON/OFF button on the TV.
Press the POWER button on the TV or press the POWER button on the remote control and
then the TV will be turn on.
T i p s
• Adjusting volume level
The volume(+) button increases the sound and the volume(-) button reduces the level of sound.

Checking features

- Use the remote control to make adjustments.
- Select VIDEO input source.
1
Press the MENU button.
2
Press the VOL+/- button.
• Each press will cycle through the menus shown below.
< Etc menu >
< Picture menu >
< Clock menu >
OWNER'S MANUAL
< Sound menu >
< Tuning menu >