Dvd Setup - AWA TFTD66 Owner's Manual

OWNER'S MANUAL

DVD Setup

How to connect a DVD (digital video disk player)
• Connect DVD video inputs to Y, Pb, Pr of COMPONENT (DVD/DTV INPUT) and audio inputs to Audio
jacks of AV INPUT.
• Component Input is available to 480/576i, 480/576p, 720p, 1080i mode.
How to use
• Press TV/AV button on the remote control of the TV to select COMPONENT. Use the DVD player
according to its owner's manual.
• Turn on the DVD player, and insert a DVD.
• Component Input ports
Connect DVD player jacks to TV Component input jacks as indicated below.
Component input jacks on the TV
Video output jacks of DVD player
PC Setup
- You can easily connect the LCD TV to your PC for outstanding image and sound.
Setup Instructions to Connect a PC to your TV
• To setup this TV in your PC window environment, select Normal, Standard or Default TV. This TV does
not support Plug and Play function
• The screen does not display when the resolution is over UXGA.
• Connect the signal cable from the TV Output port on the PC to the RGB1 (PC/DTV INPUT) port on the
TV.
• Connect the audio cable from the PC to the Audio ports of the TV.
• If your PC computer is equipped with a sound card, adjust the sound output on the PC.
• Select the display resolution of the PC to 1280X768 for the best picture. This TV resolution is 1280X768.
Y P
B
Y Pb
Y B-Y
Y Cb
Y P
B
P
R
Pr
R-Y
Cr
P
R