Dvi Setup - AWA TFTD66 Owner's Manual

OWNER'S MANUAL
DVI Setup(Under PC mode Only)
PC Setup
• First, turn on the PC computer and press the ON/OFF button on the TV to apply power to it. Second,
turn on the display by pressing the button on the TV or by pressing the POWER button on the TV
remote control.
• Use the TV/AV button on the remote control to select the RGB-DVI input source.
• Set the resolution output of the PC to WXGA or under (1280 x 768.60Hz).
T i p s
• Avoid keeping a fixed image on the TV screen for a long period of time. The fixed image may become
permanently imprinted on the screen; use a screen saver when possible.
• Change the resolution of PC to displayable mode and connect to DVI-D Input jacks of the TV.

DVI Setup

TV Image Display Specifications (RGB-PC, RGB-DVI)
Resolution
720*400
640*480
800*600
1024*768
1280*768
832*624
Vertical
Frequency (Hz)
70
85
60
67
72
75
85
56
60
72
75
60
70
75
60
75
T i p s
• Synchronization input form :
separate
• Dos mode may not work depending
on a video card if using a DVI cable.