Often Used Features; Forward And Follow Me; Call Waiting - AT&T MERLIN LEGEND Release 2.0 MLX-10 Non-Display Telephone Quick Reference Manual

OFTEN USED FEATURES

Forward and Follow Me

To program:
1.
Label a button.
2.
Press Feature and dial 00.
3.
Press labeled button.
4.
Dial 33.
5.
Press Feature and dial
To forward calls to an extension:
1.
Press an ICOM or SA button.
2.
Press programmed button or
press Feature and dial 33.
3.
Dial extension.
To forward calls to an outside
number:
1.
Press an ICOM or SA button.
2.
Press programmed button or
press Feature and dial 33.
3.
Dial 9 on phones with ICOM
buttons or the dial-out code
on phones with SA buttons.
4.
Dial phone number, then
dial #.
To setup follow me from another
extension:
1.
Press an ICOM or SA button.
2.
Press Feature and dial 34.
3.
Dial your extension.
To cancel forward and follow me:
From your extension:
1.
Press Feature.
2.
Dial 33 and your extension.
From one extension:
1.
Press Feature.
2.
Dial 34 and your
extension.
Sent from all extensions:
1.
Press Feature.
2.
Dial 34 .

Call Waiting

Single beep means inside call
waiting; two beeps mean outside
call waiting.
To turn call waiting On/Off:
1.
Press Feature and dial 00.
2.
Press any ICOM or SA button.
00
3. 11
Dial to turn on or
to turn off.
4.
Press Feature and dial
To complete a call and answer
call waiting:
1.
When you hear Call Waiting
tone, hang up.
2.
Lift handset when phone rings.
To put call on hold and pickup
call waiting:
1.
Press Hold.
2.
Press ICOM Originate Only
or SA Originate Only button.
(You must have lCOM Originate
Only or SA Originate Only
button available to pickup call.)
3.
Press Feature and dial 87.
4.
To return to call on hold,
press button with fast-
flashing light.
Pickup
To program:
1.
Label a button.
2.
Press Feature and dial 00.
3. Press labeled button.
4.
Select one of the following:
For pickup, dial
specific line or extension,
dial line number or extension.
For group pickup, dial
Park
To program:
See Programming Buttons.
To use park and speakerphone
page:
1.
Park the call.
Press programmed Park
button.
11
Press Transfer, dial your
extension, and press
Transfer again or hang up.
00.
2.
Set up page.
For speakerphone page:
1.
Press appropriate
Group Page or Page All
button, or press any ICOM
or SA button and dial Group
Page or Page All extension.
2.
Announce call and give
your extension.
For loudspeaker page:
1.
Press programmed
Loudspeaker Page button
or press Feature and dial 9
and loudspeaker page line
number. If necessary, dial
the code for the page zone.
2.
Announce call and extension
where call is parked.
To pickup a parked call:
1.
Lift handset.
2.
Press programmed Pickup
button, or press Feature and
dial 9.
3.
Dial extension where call is
parked.
5.
Press Feature and dial
To use:
Press programmed button,
or press Feature and dial 9.
If button not programmed for
specific line or extension, you
can manually dial line number
9 ; for a
or extension, if desired.
Group Pickup can also be
accessed by pressing
88.
Feature and dialing
00.
88.