Often Used Features; Headset Features - AT&T Merlin Legend BIS22D Quick Reference

OFTEN USED FEATURES

Reminder
Use the Reminder service to automatically place ringing
calls to phones in the system at preset times.
To program a reminder service button:
See Programming Buttons.
To set a reminder:
Press Reminder Set button or press programmed
1.
Feature button and dial 8 1 .
2.
Press DSS or Auto Dial button for the extension.
3.
Dial a four-digit time from 1200 to 1159.
4. Dial 2 (A) for a.m. or 7 (P) for p.m.
5.
Repeat Steps 2 – 4 for each additional phone.
6. Hang up.
To read reminder messages on a display:
1.
Press Reminder Set button or press Feature and
dial 8 1 .
2.
Press DSS or Auto Dial button for the extension or
dial the extension.
3.
Displays appear as follows:
Answered reminder call:
extension: A time AM/PM
Missed reminder call
extension: X time AM/PM
Reminder set:
extension: time AM/PM
4.
Hang up.
To cancel, set and answered reminders:
1.
Press Reminder Cancel button or press Feature
and dial * 8 1 .
Press DSS or Auto Dial button for the extension or
2.
dial the extension.
To clear a missed reminder:
1 .
Press Missed Reminder button.
Press programmed Reminder Cancel button, or
2 .
press Feature and dial * 8 1 .
3 .
To see next missed reminder, press Feature and
dial * 2 8 .
4 .
Repeat Steps 2 and 3, if necessary.
Press Missed Reminder button.
5 .

Headset Features

You must program an Auto Answer All button to
automatically send calls to the headset. You must have
a General Purpose Adapter (GPA) to connect the
headset to the console.
To program:
See Programming Buttons.
To use:
1. Verify that the switch on the GPA is on Auto.
2. Toggle programmed Auto Answer All button
to turn headset on/off.
Calendar
To set time, day, and date:
For BIS-22D and BIS-34D Consoles:
1. Press Set until item flashes.
Press Fwd or Rev to change item.
2.
Press Set.
3.
4. Repeat Steps 1-3 if necessary.
Press Exit.
5.
For MERLIN II System Display Consoles:
1. Press Clock Functions button.
2.
Select S e t .
3.
Select D a y .
4.
Press button below display to select
current day.
Select Time.
5.
Press Hour and Min arrow keys.
6.
Select Date.
7.
Press Month and Date arrow keys.
8.
Select Exit twice.
9.
Press Clock Functions button.
10.
Copyright © 1992 AT&T
MERLIN LEGEND is a trademark of AT&T