Personal Speed Dial - AT&T MERLIN LEGEND Release 2.0 MLX-10 Non-Display Telephone Quick Reference Manual

OFTEN USED FEATURES
Paging
To program Speakerphone paging buttons:
1.
Label a button with Group-Page (name) or
Page All.
2. Press Feature and dial 00.
3. Press labeled button.
4. Dial 22 and Group Page or Page All extension.
5. Press Feature and dial
To use Speakerphone paging:
1. Press an ICOM or SA button.
2.
Lift handset.
3. Press programmed button or dial company-pro-
vided Group Page or Page All number.
4.
Make announcement after beep.
Loudspeaker paging:
To use
1.
Lift handset.
2. Press Loudspeaker Page button or press
Feature and dial 9 and Loudspeaker Page
line number.
3. Dial code for company-defined zone.
4.
Make announcement.

Personal Speed Dial

Program 2-digit codes for numbers you dial most often,
then use feature buttons to use these codes to dial a
number.
To program personal speed dial codes:
1.
Press Feature and dial 00.
2.
Dial # and 2-digit code from 01 to 24.
3. Dial 21.
4.
Dial phone number, including dial-out codes.
(see Special Characters Table).
5.
Repeat Steps 2-4 to program additional codes.
6.
Press Feature and dial
To use:
1.
Select appropriate line button.
2.
Press Feature.
3.
Dial 2-digit code (01-24).
00.
00.
Coverage
For coverage, a co-worker must program an individual
coverage button on his/her phone for either primary or
secondary coverage. (Secondary coverage offers a
two-ring delay so you may answer before calls are
covered. ) You can program buttons for Coverage OFF
or Coverage VMS OFF. To prevent coverage of inside or
inside/outside calls, use the following procedure:
To program which calls are covered:
1.
Press Feature and dial 00.
2. Press an ICOM or SA button.
3. Dial 48 for inside and outside calls,
or dial 48 for outside calls only.
4. Press Feature and dial
To program a coverage off button:
1.
Label a button.
2.
Press Feature and dial 00.
3.
Press button to be programmed.
4. Dial 49 for coverage OFF or
coverage VMS OFF.
5. Press Feature and dial
To use buttons:
Toggle On the Coverage VMS OFF button to
prevent outside calls from being sent to voice mail.
Toggle On the Coverage OFF button to stop calls
from being sent to coverage.
Copyright © 1992 AT&T
MLX-10 is a trademarks of AT&T
MERLIN LEGEND is a trademark of AT&T
00.
46 for
00.