Call Coverage; Touch-Tone Enable; Paging - AT&T MERLIN 3070 User Manual

CALL COVERAGE

The Call Coverage feature lets you answer calls made to someone
else. You and the person you cover for must decide whether calls
ring immediately at your phone, ring at your phone if not answered
after three rings, or do not ring at all at your phone. (If you pro-
gram the button so that calls don't ring at your phone, you must
rely on seeing the green light flash next to the Cover button.)
The Cover button is similar to a line button. If your phone rings
and the green light flashes next to the Cover button, lift the hand-
set to answer the call. If you've programmed the button so that
calls to be covered don't ring (you'll still see the green light flash),
lift your handset and touch Cover to answer.

TOUCH-TONE ENABLE

If your system has lines that carry rotary signals, you can switch
over to Touch-Tone service in the middle of a call to use services,
such as credit card authorizations, that require tone signals. Dial
the first part of your number as usual (you hear rotary clicks). Then
touch Touch-Tone Enable, and dial whatever additional numbers
you need (hear tone signals).

PAGING

For speedy access to your company's loudspeaker system, a Page
button can be used in place of dialing a paging code. Lift hand-
set, touch Intercom and then Page.
+ +
Touch-Tone
Enable
+
Intercom
+
Page
14