Fuse Test - Fluke 233 User Manual

Fuse Test

To do a fuse test:
1. Set the function switch to .
2. Connect a test lead to the  jack as shown in
Figure 11.
3. Touch the other end of the test lead to the A jack.
A good fuse will show a resistance of 0.5
Replace the fuse if the resistance is higher or  is
shown.
or less.
True-rms Remote Display Digital Multimeter
Good fuse: 0.0 Ω to 0.5 Ω
Replace fuse: OL
Figure 11. Fuse Test
Maintenance
gcc105.eps
33