Dock The Display Module With The Meter Base - Fluke 233 User Manual

233
Users Manual
If the radios in the Meter base and display module do not
connect,   flashes in the display. Dock the display
module with the Meter base and turn the Meter off and
then on. When the Meter is turned on, the red high-
voltage LED on the Meter base flashes. If not, replace the
Meter base batteries. For maximum battery life, dock the
display module to the Meter base when the Meter is off.
The display module has a built-in magnet to attach to
metal surfaces.

Dock the Display Module with the Meter base

To dock the display with the Meter base as shown in
Figure 8:
1. Set the display on the top 10 millimeters of the Meter
base with the battery compartment of the display in
the channel in the top of the Meter base.
2. Push the display nearer the Meter base until the
display latches catch.
28
1
Figure 8. Dock Display Module with Meter Base
2
gcc115.eps